Education

Mississinewa 1812 | New videos from Muzzle Blasts!

Join us this week for “Muzzle Blasts on the Road”! We’re sharing two videos from Mississinewa 1812 from October 2019.

Mississinewa 1812 is a historical commemoration of the Battle of Mississinewa fought in Grant County, Indiana. The two day battle was fought on December 17-18, 1812 in bitter cold conditions and 11 inches of snow. We'd like to thank the Mississinewa Battlefield Society for allowing us to come film at the event.

In our second video, we sit down with Margaret Bickenheuser to talk about Colonial American baskets. Margaret is a renowned basket weaver, her work has been featured in Early American Life on several occasions. You can view her website here- http://www.mylittlebasketshop.com/

How to Stain a Cabela's Kit Muzzleloader

Questions and answers from the NMLRA Facebook Group

78531801_1019447028412339_8892372861700800512_n.jpg

“So I pulled the Trigger and decided to purchase the 50. Cal, Kentucky from Cabela's today, as a Christmas gift for my son, he prefers shooting black powder long gun's more so than modern firearms, because of his interest in Civil war history, I think it will make an excellent father and son experience together, my question for y'all is, what type of wood stain application should I use, and what methods are best for applying the stain to the stock? Thanks.”

-Daniel Colt Foely

This question from Daniel racked up about 40 comments over the weekend, many of them very helpful to new builders, so we wanted to share them!

Here are some of the most informative comments from the post.

Larry Rowland said, “Get "Homar Dangler's" stains and finishes, is my suggestion. Follow the directions.”

WL McCoy brought up, “ Lowe’s has an oil based colonial maple that I like. You could add a little walnut if you like darker. Hand rub with old T-shirt material. Cotton.”

Dale Pederson suggested Laurel mt. “Makes some good stains. You cad find them at Track Of The Wolf.”

Mike Dollinger said, “ I used shoe polish on my 1st gun. I used homer dangles stain on another. Aqua fortis on another”

79335664_10215360588663468_8971716313705611264_o.jpg

Rob Scroggins added, “ I built mine a couple years ago. Used minwax stain (dark walnut) and tung oil as a finish”. He included a photo as well.

“If its plain wood and your first gun, get fiebings leather dye in alcohol not oil. Its easy, dries instantly and med brown is a great color with a reddish tinge and dark brown is pure brown. Birchwood caseys tru oil is a foolproof beginner finish. If you want to go the authentic route it would be aqua fortis, heat and oxidized linseed oil but hard to master. When you assemble this there are some shapes you can modify that will really improve this rifle if you just ask there are a lot of people here to help guide you.” - Mike Davis

Josh Young took a simpler approach, Plain old boiled linseed oil never hurt no one.

And a special thanks to Paul Luttrell for his notes and story on building a similar kit. “This was like my first kit build, in. 45. Brown leather dye worked guite well for me. It actually produced a reddish tint on the stock, after final sanding, of course. I rubbed in several coats of "boiled linseed oil", rubbing in with my palm until warm then wiping off excess oil after each coat and letting it dry. The choice is yours, of course, there is a myriad of stains and techniques.
A friend of mine tried Dixie Gun Works' suggestion of soaking a bag of chewing tobacco in ammonia, letting it sit for several days before applying with an old piece of T-shirt, then rubbing in Tung oil. That was on a cherry stock.”


If you’d like to join in on the conversation, head on over to our NMLRA Facebook Group! The group is open to anyone who is interested in Muzzleloaders and living history as long as they follow the rules.

Find out more about the NMLRA

NMLRA.org

Muzzle Blasts on InstagramNMLRA on Facebook

NMLRA on Youtube

Muzzle Blasts Podcast

A Most Terrible Musketry: The Battle of Kernstown

By mid-afternoon of March 23, 1862, the crossroads hamlet of Kernstown, Virginia was nervously eyed by the Confederacy's Valley Army.  Under the command of Major General Thomas J. Jackson, the Rebels had been on the run for the previous eleven days and were eager to turn the tables on their Yankee pursuers.  Better known simply as "Stonewall", Jackson had earned his nom-de-guerre for tenacious fighting at the First Battle of Mannassas in July 1861. A West Point graduate and former professor at the Virginia Military Institute, he combined his professional training with an innate tactical ability that eventually earned him a near perfect battlefield record.  His unconventional genius for strategic operations, still studied today in military academies across the globe, ranks him as one of the greatest soldiers in American history.

    But in the fight that was to unfold on the fields and hills of Kernstown, Jackson was faced by the most unlikely of opponents.  Though two Federal generals were within minutes of the battlefield, command of Union forces devolved, through an unlikely turn of events, on an obscure Hoosier colonel with limited combat experience.  Fated to confront the legendary Stonewall, and the greatest challenge of his life, was an affable citizen soldier from Martin County, Indiana - Nathan Kimball.

    Born in Fredericksburg, Indiana on November 22, 1822, Kimball possessed both ambition and a keen intellect that early marked him for leadership.  Graduating from Indiana Asbury College in 1841, he briefly supported himself as a schoolteacher before settling on a medical career.

    By 1845, Kimball had taken a degree at the University of Louisville, married, and settled in Washington County where Kimball opened a thriving practice.  His successful career as a country physician, however, was put on hiatus by the outbreak of the Mexican War in 1846. Kimball, already a highly respected member of his community, raised a company of volunteers and led the men to war when they were assigned to the 2nd Indiana Infantry.

    The young captain gained valuable experience during Zachary Taylor's campaign in northern Mexico, but the regiment's performance at the Battle of Buena Vista on February 23, 1847 proved an embarrassment that would haunt the state for decades.  In the face of an impending Mexican bayonet charge, the green troops of the 2nd panicked, fled in disorder, and virtually unhinged the American line.  A near disaster was averted by the likes of Kimball, who desperately attempted to rally the remnants of his company.

    Despite a hard-fought American victory, the conduct of the 2nd, considered scandalous during the aftermath of the war, was a source of much recrimination.  Ultimately, blame for the regiment's collapse fell on its commanding officer, Colonel William Bowles of Orange County; the regiment's junior officers, including Kimball, largely escaped the imbroglio with their reputations intact.

    Following the war, Kimball moved his practice to Martin County and clumsily threw his hat into the political arena.  A member of the defunct Whig party, Kimball lost an election to the state senate in 1847, and likewise failed in his bid for a seat at the electoral college in 1852.  When the Republicans formed in 1854, Kimball cast his lot with the new party.

    The ascendancy of the Republicans in the 1860 presidential election of Abraham Lincoln proved a watershed event for a divided nation, and the subsequent secession crisis and outbreak of civil war once again saw Kimball don a uniform.  As he had in 1846, he raised a volunteer company from Martin County and was elected its captain. He was, however, quickly commissioned colonel of the new regiment, the 14th Indiana.  Kimball not only had the right political affiliation for such an appointment, he was the only officer in the regiment to possess any appreciable military experience.

    Largely recruited from the farmhands and laboring class of southwestern Indiana, the regiment was woefully ill prepared for active campaigning.  The enlisted men were entirely unaccustomed to military discipline and the regiment's officers, elected from the ranks, were little better. Kimball had a scant two months in which to train his men before they were ordered to the front in July 1861.

    Assigned to the rugged hills of western Virginia, the 14th spent several miserable months operating against rebels on Cheat Mountain, but the haste of pressing the poorly trained Hoosiers into action soon told.  Unseasonably foul weather and plain homesickness combined to drain the spirits of the inexperienced soldiers; by the end of August, morale was considerably degenerated   Stirred by a handful of malcontents, the men fell under the delusion that they could not be held in the service past three months and a virtual mutiny was threatened. A semblance of order was restored following a disciplinary crackdown which included a handful of courts-martial.

    Despite the rough start, Kimball transformed his rough-hew Hoosiers into real soldiers over the following winter.  The troops proved adept at complaining - the eternal prerogative of the soldier - but Kimball rarely became the object of their ire.  "He is a meticulous soldier," observed one private, "and he loves his men, and they all know it, and so they love him." This sincere concern for their welfare inspired a trusting devotion from the men who, it was said, "would follow him anywhere and anytime, and against any odds."  Such sentiment would be desperately needed the following year.

    The spring of 1862 saw an ambitious Federal attempt to end the war by one great thrust for the Confederate capital. Major General George McClellan, commanding the Army of the Potomac, devised a grand plan to seize Richmond not by an overland campaign but by a massive amphibious operation that would unexpectedly threaten the city from the east.  President Lincoln gave grudging approval to the operation on the emphatic condition that McClellan would make certain the defense of his own capital and, in the president's words, "Leave Washington secure."  McClellan consequently ordered his army's V Corps, then stationed in the Shenandoah Valley, to position itself in northern Virginia and thereby cover the approaches to Washington.

    Events in the Valley seemed to favor such a move.  In the first week of March, V Corps commander Major General Nathaniel Banks had moved against Stonewall Jackson's Valley Army and forced the Confederates to evacuate Winchester, the most vital road hub in the northern Shenandoah.  With the outnumbered Rebel army on its heels, it was thought safe to transfer the V Corps toward Richmond. 

    Jackson was equally determined to forestall such a move.  Under orders to keep Federal troops in the Shenandoah from cooperating with McClellan, Stonewall acted quickly when, on March 21, he was informed that the V Corps appeared to be headed out of the Valley.  "Apprehensive that the Federals would leave this military district", he wrote, "I determined to follow them with all my available forces."  

    The V Corps' exit from the Valley was indeed imminent.  General Banks, in making preparations to move his command, was likewise of no mind to leave the northern Shenandoah wide open to a Confederate thrust, and he stationed his 2nd Division, under Brigadier General James Shields, in the environs of Winchester.

    On March 22, the vanguard of the rebel army appeared at Kernstown, about two miles south of Winchester.  Shields deployed troops to counter what he considered to be a mere Confederate demonstration, but while reconnoitering that evening was unexpectedly struck by shellfire.  Rushed back to Winchester, army doctors discovered that the general's left arm was broken, his shoulder and side painfully injured, and he struggled to remain conscious. While Shields lay in bed, he passed command of the division to his senior brigade commander, Colonel Nathan Kimball.

    Kimball, though he had yet to receive a brigadier's star, had been advanced to brigade command that winter.  However, at daybreak on March 23, 1862, the unassuming Hoosier officer had barely commanded more than a company of men in pitched battle.

    It was a Sunday morning, and most Union troops expected an uneventful day in camp.  Shields, slowly recuperating in Winchester, conferred with Banks and both agreed that the previous day's fight had merely been the result of an unimpressive rebel cavalry probe.  Banks made plans to leave town that afternoon.

    When fighting resumed around 9:00 A.M., Kimball confronted the Confederate skirmishers and quickly consolidated his own position around Pritchard's Hill, an eminence that commanded the Valley Turnpike, the area's primary north-south thoroughfare.  From his sickbed in Winchester, Shields encouraged Kimball to press forward from his Pritchard's Hill position and drive in the enemy skirmishers, admonishing that "there is no force before you but that we encountered the other day."  

    Kimball demurred.  Sensing that a greater Confederate force was in the area, he called up the rest of the division to bolster his Pritchard's Hill line and maintained a defensive posture.  For three hours, Kimball sparred with the Confederates in his front and refused to budge.

    By 1:30, Shields grew exasperated with the static situation and forwarded yet another order for Kimball to press the attack.  Convinced that the enemy had not yet shown his "real strength", Kimball made the decision to disobey Shield's direct order. He later explained that the general could not possibly "comprehend the situation, the strength of the enemy, nor the positions held by the respective forces, and satisfied that from his bed in the city five miles to the rear he could not properly conduct the movements which might be required by the exigencies of the situation, I determined to remain on the defensive and in the position now held by my line."  

    Kimball's caution was not misplaced.  Soon after he refused Shield's second order, the bulk of Jackson's force made its appearance two miles to the south.  Surprisingly, the famed Confederate commander never intended to launch an attack that morning. An intensely devout Presbyterian, Jackson was entirely disinclined to give battle on the Sabbath, but following erroneous reports that he was opposed by just one Federal brigade, he felt obliged to throw his entire force into the fight and dislodge the Federals from Pritchard's Hill.  The pious Jackson offered an apologetic explanation of his decision to hit the Federals on the Lord's Day. "Important considerations," he explained, "rendered it necessary."  

    He was, however, not foolish enough to approach Pritchard's Hill head on.  Moving his troops west of the turnpike, Jackson aimed for a low ridge that angled southwest to northeast.  Known to locals as Sandy Ridge, the position dominated the surrounding terrain, including Pritchard's Hill, and led menacingly to Kimball's right and rear.  When Confederate artillery unlimbered on the ridge and began lobbing shells on Kimball's position, the colonel realized he had been outmaneuvered and was in a precarious position.  He immediately began shifting troops for a desperate assault on Sandy Ridge.

    Oddly enough, both Kimball and Jackson labored under erroneous assumptions regarding his opponent's strength.  Kimball, with roughly 5,000 men at his disposal, grossly overestimated Jackson's force as exceeding his own. Jackson, commanding under 3,000, badly underestimated the Yankees at just one brigade, not an entire division.  When one of his staff officers finally observed the bulk of Kimball's force and reported the error, the imperturbable Stonewall greeted the shocking news with characteristic calm. "Say nothing about it," was his response, "we are in for it."  

    As the fight developed, both sides were in for a severe mauling.  The farm fields that crowned Sandy Ridge were crisscrossed by a network of stone and rail fences that offered a marked advantage to any defender.  Jackson, finally realizing that he was outmatched and therefore incapable of seizing Winchester, contented himself with holding his position until he could withdraw his forces after nightfall.

    At approximately 4:00 P.M., the first Federal troops launched their assault on Sandy Ridge.  Advancing in the face of determined Confederate troops who were well protected behind a stone wall, the Union men braved a withering fire and were felled by the dozens.  Kimball dispatched further reinforcements to bolster the attack, but regiment after regiment stalled in front of the ready-made Confederate breastworks. Having been forced to hurriedly shift their position near Pritchard's Hill in order to deal with the rebels on Sandy Ridge, the Federals largely went into action piecemeal.  In the confusion of the fighting, their disjointed attacks failed to take full advantage of their numeric superiority.  

    Despite the high cost in lives, the attack slowly succeeded in weakening the Confederate lines.  In order to counter the mounting pressure from Kimball's troops, Jackson was forced to extend his line further toward the Valley Turnpike in order to protect his right flank.  Stonewall's maneuvering succeeded in blunting continued Federal attacks, but in the process his own lines were stretched to the breaking point.

    The fierce fighting on Sandy Ridge shocked the most experienced of troops.  Civilians in Winchester were horrified by the sound of battle. A “most terrible and long continued musketry" one described it, "not volley after volley, but one continued fearful roll."  Kimball noted the raging "fury" of the battle and even Jackson, a grizzled veteran with two decades of experience, said that he did not recollect "having heard such a roar of musketry."  

    By 5:00 P.M., such brutal fighting had produced little more than a bloody stalemate.  The armies had grappled for over an hour with few results other than dead and wounded men.  Determined to break Jackson's lines before nightfall, Kimball ordered one of his last unbloodied regiments toward the inferno on Sandy Ridge: the Hoosiers of the 14th Indiana.

    Subsequent to Kimball's promotion to brigade command, leadership of the regiment fell to Lieutenant Colonel William Harrow.  A Knox County attorney, Harrow possessed a brash, no nonsense personality that failed to earn him the affection of the men in the ranks.  Destined for divisional command before war's end, the hard-driving Harrow laid the foundation of an aggressive command style as he led his 450 men at the double-quick toward the firing line.

    As the troops mounted the slope of Sandy Ridge, the entire hillside was shrouded in gun smoke.  When what seemed to be gray clad soldiers appeared to the front, the jittery Hoosiers opened fire.  A lone figure darted toward the regiment, frantically calling on them to hold their fire; in the confusion, they had inadvertently opened up on the rear of the 5th Ohio.  The Buckeyes' commander, Lieutenant Colonel John Patrick, urged the Hoosiers to the left, where, he shouted, they would meet with "plenty of secesh."

    The regiment wheeled into action on the extreme left of the Federal line.  Determined to do their duty, the men "marched up to their places as deliberately as if on drill."  At the first Confederate volley, the regimental standard bearer fell. His companion who carried the national flag then lifted and waved both banners, only to be shot down "in about two seconds."  

    Men began to fall, and one soldier thought that the sound of bullets slamming into his comrades was eerily similar to the sound of beating carpets clean back home.  The 14th Indiana had entered a maelstrom.  About 90 yards to the front, "a long wreath of blue smoke settled over a low stone wall," recalled one Hoosier, "out of this a fire flashed constantly.  Between our line and this wall the dead and wounded lay in heaps." Harrow's soldiers faced the grim brutality of combat in different ways. Some, paralyzed with fear, fell to the ground; most stoically stood their ground and exchanged fire with the enemy.  But in a singular instance of personal heroism, the actions of a private from Company G would alter the course of battle.  

    Paul Truckey, a carpenter from Vincennes, leapt forward, and, waving his rifle aloft, cried out "Come on, boys!"  He then sprinted "headlong after the rebels as a dog would chase a rabbit, loading and firing as he went."  Galvanized by Truckey's action, a number of voices were heard to cry out "forward" and the entire regiment spontaneously dashed for the rebel line.

    When the Yankees were within twenty yards of the stone wall, Lieutenant Colonel John Patton of the 21st Virginia received, virtually simultaneously, a withdrawal order from his brigade commander.  Having already been worn down by repeated Federal attacks, the rush of oncoming Hoosiers was more than the Confederates could withstand.  Finally released from the fight, the Virginians scattered from the ridge.

    The flight of the 21st Virginia, which occupied the extreme right of Jackson's army, exposed his flank and caused a general collapse of his battle line.  Kimball's entire division then pressed its advantage and closely pursued the enemy. Federal units became hopelessly mingled in the confusion and Captain Elijah Cavins of the 14th Indiana recorded that "The Confederates fell back in disorder, and we advanced in disorder just as great, over stone-walls and over fences, through blackberry-bushes and undergrowth…brigades, regiments, and companies advanced in one promiscuous, mixed, and uncontrollable mass.  Officers shouted themselves hoarse in trying to bring order out of confusion, but all their efforts were unavailing."

    The retreating rebel army retired slowly and "continued to make it very hot for our men," rallying "in every ravine and behind every hill - or hiding singly among the trees."  A complete rout of Confederate forces was averted by such stubborn fighting, and nightfall enabled Jackson to withdraw his battered army from the field.

    A frightful price had been paid for the northern victory.  Jackson reported a total loss in killed, wounded, and missing of 718; Kimball reported 590 casualties.  The 14th Indiana suffered 54 overall casualties. A Federal surgeon's memories of the ghastly battlefield sadly humanized such cold statistics.  "Oh, what a sight," he recalled, "legs smashed, heads torn off, faces mangled, arms shattered, pools of blood, bowels protruding, and every conceivable mutilation."  

    Ironically, Jackson's tactical defeat at Kernstown turned into a strategic victory for the Confederacy.  Alarmed by the rebel attempt on Winchester, Federal authorities immediately ordered Banks’ V Corps back into the Valley, frustrating McClellan's overall efforts to secure reinforcements for his Peninsula Campaign.  Over the succeeding three months, Jackson's Valley Army outmarched, outmaneuvered, and outfought its Federal opponents in a string of victories from one end of the Shenandoah to the other. Known simply as the Valley Campaign, Stonewall's brilliant generalship against overwhelming odds secured his place in the pantheon of America's military leaders.  The fight at Kernstown constituted the single instance in which the Confederate legend was defeated on the battlefield.  

    General Shields, who resumed command of the 2nd Division on April 30, initially gave Kimball credit for the victory.  Shields offered his thanks for Kimball's independent management of the battle, and commended the colonel "for his devotion to the interests and honor of the command and the signal service he has rendered it in this emergency."  

    At the same time, Shields was encouraging erroneous newspaper accounts of the battle that credited him with command at Kernstown.  His official report of the engagement was little more than an inaccurate and blatant attempt to personally capitalize on the victory.  In it he claimed to have been the mastermind of Federal strategy on March 23, and asserted that Kimball had simply "executed my orders."      Nathan Kimball naturally bristled at such fast and loose treatment of the facts.  In a letter to a friend, he insisted that "I had full command and planned and directed the movements of the entire fight in person…You will not wonder, therefore, that I am annoyed at seeing the garbled and false accounts that have appeared in the newspapers."  

    Kimball went on to serve with distinction through the remainder of the war, ultimately earning the rank of brevet major general.  Gravely wounded at Fredericksburg, he was nominated for lieutenant governor of Indiana in 1863 but refused the offer in order to stay with his men.  Later transferred to the western theater, he commanded troops at Vicksburg, Atlanta, Franklin, and Nashville.

    Following the end of the war, Kimball resumed his private practice and re-entered politics.  He became the first commander of the Grand Army of the Republic in Indiana, and served as state representative from Marion County.  In 1873 he was appointed Surveyor General of Utah Territory; briefly working as government physician at the U.S. Indian Agency in Fort Hall, Idaho, Kimball became the postmaster in Ogden, Utah, where he passed away on January 21, 1898.

    For Nathan Kimball, recognition as the only Federal officer to best Stonewall Jackson has proven somewhat elusive.  As a result of the false accounts of the battle that began circulating in the spring of 1862, most popular histories of the war, to this day, generally credit the victory at Kernstown to the bed-ridden and incapacitated General Shields.  Though often slighted by history, Kimball was always defended by his men. "The Hoosier soldiers love Col. Kimball," explained a member of the 14th Indiana. The victory at Kernstown “was won by our forces under Colonel Kimball.  The honor is his, and he should have accredited to him what his merit deserves."     

This article was originally printed in Muzzle Blasts Magazine. A digital archive of every Muzzle Blasts magazine is available online to all NMLRA members

NMLRA.org

Muzzle Blasts on Instagram
NMLRA on Facebook

NMLRA on Youtube

Muzzle Blasts Podcast    

     

   

   

What happened to the sport of Muzzleloading during WWII? An interview with Joe Barnes and Mark Barnhill

We're back with NMLRA member Joseph Barnes as he shares his memories from the 1940s and how it impacted Muzzleloading. Joe’s first NMLRA event was in 1937 when the shoots were held in Dillsboro, Indiana. Joe returned the following year, 1938, to help organize and then win the first-ever NMLRA junior match with a score of 44 out of 50.

He is the only surviving member from our historic panoramic photograph from the range in 1938. You can hear Joe tell more stories of the early muzzleloading days here.

It was wonderful to get Joe into the Rand House Museum at NMLRA headquarters during the “Pole Cat Porter” Exhibit at the 2019 National Championships. While Joe didn’t know Pole Cat personally, he was able to share some stories he heard at the time and share some first-hand accounts of early muzzleloading in the 1900s.


This video is the second of two shot in the Pole Cat Porter Exhibit at the 2019 NMLRA National Championships. Catch the first one

Making and Fitting Muzzle Caps. Part I - Muzzle Blasts Archive

By Fred Stutzenberger

There are many dealers out there who sell ready-made caps, but anyone who shapes one rifle to fit a muzzle cap must be a little touched in the head

    Of all the hardware used in the stocking of a muzzleloading rifle or pistol, the muzzle cap (or fore end cap on a halfstock) encompasses the widest range of materials and methods of manufacture. Most of the 17th Century wheel-lock rifles were capped with carved or scrimshawed bone, ivory or stag (3). The Germanic Jäger rifles of the 18th Century were often capped with horn, exotic woods or with highly decorative castings (Fig.1) of brass or gilded iron (4). The 18th-19th Century American fullstock longrifle was generally capped with soldered two-piece or swaged one-piece sheet brass (2) except in the Southern Appalachians where rifles were capped with hand-forged iron grooved for the ramrod or sometimes with bone (Fig. 2). 

    I remember seeing only two old original American halfstock rifles without a fore end cap (perhaps readers can help me out on that one). Most of the old halfstock rifles that I have seen were capped either with the common two-piece sheet metal cap a la’ the Hawken (Fig. 3) or caps cast of pewter, tin or other low temperature-melting (250-300oF) metal such as CerroSafe (see suppliers’ list). The ability to cast low temp metals into any conceivable cutout area generates some flamboyant designs (Fig. 4). British gunmakers of the late muzzleloading era were much more conservative in the capping of their fore stocks, using horn with a distinctly shaped schnabel (Fig. 5). 

    From the strictly utilitarian point of view, the purpose of the muzzle cap is to protect the vulnerable tip of the stock and prevent it from splitting. The simplest restraint to that purpose is a plain metal band (Fig. 6) wrapped around the fore stock an inch or two back from the tip. Cheap-but-sturdy trade guns were turned out by the thousands and peddled to the First Americans by the Hudson’s Bay and Northwest companies during the fur trade era (5). 

    Most of the muzzle caps on American longrifles were made of sheet metal (examples in Fig. 7). Making such muzzle caps is fun and rewarding if you are creative and experienced with working metals. If you are not, it is best to buy a commercially made cap if you can find a source for one that closely fits your barrel. Commercial caps are available in 1/16” increments from ¾ to 1- 1/8. If you find a cast brass cap that is very slightly larger than the muzzle, Keith Lisle (custommuzzleloaders.com) suggests carefully squeezing them a bit in a vise, then filed & shaped to fit a muzzle that is slightly smaller than the casting. Also, the cast caps are usually quite thick, thus you can square them off & make them appear as a hand made cap, rather than the rounded generic cap as it was cast. 

    In Part I of this series, the procedure for installing a commercial cap will be described. In Part II, with insight from Keith, we are going to show you how to make several styles of metal caps using different methods. Part III will describe the making of caps from horn and exotic wood.

    Before you decide, be sure that a muzzle cap is appropriate to your style and period of rifle or pistol. Some of the most elegant pistols I’ve seen (the best British, French and Flemish pistols come to mind) made their striking appearance sans muzzle caps. So if you have a commercial cap that is appropriate for your rifle or pistol, let’s get started.

    It is easier to get your commercial cap fitting closely to your barrel by taking the barrel out of the stock. With a barrel/cap combination of standard dimensions, fitting the cap to barrel is pretty easy. Usually they go together nicely with little filing. The fitting of the cap to the stocked barrel is a different matter.

1.Remove enough wood from the tip of the fore end to allow for the installation of the cap with about a 1/16-1/8” of the barrel protruding out beyond that. With the barrel clamped tightly in the channel, slide the cap onto the muzzle in reverse and press it up under the barrel for a tight fit. Pencil a line around the circumference of the cap onto the fore end. That will be the dimension of the cap when installed. Hopefully you have left enough wood on the stock to accommodate that.

2. Measure the inside length of the cap. It is easy to do that with an adjustable square. Add 1/8” to that measurement to allow for the thickness of the end cap and to allow a bit of barrel to protrude beyond the cap. Lock the square  and set the base against the muzzle. Draw lines on the side of the fore stock to determine how far back the wood needs to be removed from along the fore end (Fig. 8). Using a thin-bladed saw (a 24-tooth hacksaw blade works well), carefully make a series of shallow cuts around the fore end. Be careful not to saw into the barrel channel . . .that would seriously weaken the fore end. Those cuts will determine where the back edge of your cap will mate to the wood. 

3.Using the cap outline and length as reference lines, remove the wood between. That will be the first stage of wood removal. 

4. The first stage of wood removal has left the outside dimensions of the cap when installed. Now measure down from the flats of the end plate to the curvature of the inner surface of the cap to determine the shape of the wood that will be left when the cap is installed. In this second stage of wood removal, mark lines the same depth down from the bottoms of the barrel channel flats (a dial caliper is a good measuring tool for this). That will give you references as to where to draw the outline of the end plate where it fits under the barrel (Fig.9). Alternatively, you can make a template of the end cap and use it to make the outline for stage two. In either case, make sure that the flats of the end plate and the flats of the barrel channel line up closely. 

5.Carefully remove the wood back to the saw cuts described in Step 2 (the wood will be getting pretty thin). At this stage, the muzzle cap should start to slide onto the wood. Coat the inside of the cap with inletting dye, grease, lipstick or other visible indicator. Slide the cap on until resistance is felt, remove and carefully file off any marks from the wood. Repeat fit and file until the cap slides on back to the shoulder and does not rock from side to side. 

6.Coat the rear edge of the cap with inletting dye. With the barrel and cap in place, give a gently tap on the front end of the cap and remove it. Shave off any black marks on the shoulder, removing little slivers of wood until you get a close fit all the way around (Fig. 10). 

7.Even if you have doing a good job of fitting, the wood encompassed by the cap is thin and fragile. It needs to be reinforced.  The old timers used hide glue. Epoxy barrel bedding compound is much better (see suppliers). Coat the inside of the cap and the barrel with release agent if you want to be able to remove it later. If you want to do a permanent installation, Keith suggests that the inletting black, lipstick etc. should be removed with Acetone or Brake Drum Cleaner on a rag, wiping the surface clean prior to applying the AcraGlasTM or other epoxy bedding. If you have access to a bead-blasting cabinet, give the inside of the cap a light treatment; a light sanding with 220 grit sandpaper will also improve bonding. Coat the barrel with release agent or paste wax. You don’t want the barrel to be permanently fixed to the cap.Fill the cap with an excess of bedding compound to prevent voids. Slide the cap onto the wood, clamp the barrel into place for proper alignment and give a few gentle taps on the end plate to make sure it is seated against the shoulder. The compound should squeeze out all around. Keith pulls the cap back firmly to the shoulder and up against the barrel using a combination of rubber bands and A-frame clamps (Fig.11).

8.After the compound has set up, turn the assembly upside down with the corner of the butt plate on a solid surface. Tap the butt against the surface and the barrel will lever itself out of its channel. 

9.Anchor the cap into place using a small flat head machine screw; a 2-56 or 3-48 works fine (Fig. 12a, 12b). I have made soft copper rivets from 2 gauge electrical wire. They work fine, but it is awkward holding the stock in place (sans barrel) when riveting. The underside of the barrel can serve as the “anvil” when peening the rivet on the cap outside. When you peen the rivet on the inside of the cap, make sure you have a firm support under the rivet on the outside. Keith Lisle is better in this than I am; he will describe his procedure in detail in Part II of this series

10.Finally, level the ramrod groove to eliminate any “step” between the bottom of the groove and the underside of the cap. When replacing the ramrod, you want a flawless smooth entry ramp into the thimbles.

    Installing a commercial cap takes time and patience even if you have the proper cap-to-barrel fit. But what if your muzzle dimensions fall between increments of commercially available caps (as swamped or tapered custom barrels tend to do)?  One size is too small, the next size up is too big, so you are left to make your own. Part II will describe making a cap that is custom fit to your barrel. 

Acknowledgment

Thanks to Keith Lisle (Custommuzzleloaders.com) for his helpful suggestions and to John Cummings for his impeccable editing. 

Suppliers

Brownell’s Inc., 800-741-0015, Brownells.com, for Hi-Force 44 low-temp silver solder, AcraGlasTM epoxy bedding and a wide range of gunsmithing materials.

Track of the Wolf (trackofthewolf.com/List/Item.aspx/800/1) for a wide range of sheet metal and cast muzzle caps

References

1.Alexander, Peter A. The Gunsmith of Grenville County. Scurlock Publishing Co., Texarkana, TX, 2002.

2.Buchele, William, George Schumway and Peter Alexander. Recreating the American Longrifle. G. Schumway, Publisher, York, PA 1999.

3.Gusler, W.B. and J.D. Lavin. Decorated Firearms 1540-1870. The Colonial Williamsburg Foundation, Williamsburg, VA, 1977.

4. Wolf, Erhard. Steinschloss-Jägerbüchsen. DWJ Verlag CmbH Publishers, Blaufelden, Germany, 2006.

5.Hanson III, Charles E. Trade Gun Sketch Book. Track of the Wolf, Osseo, MN, 1978.

This article was featured in Muzzle Blasts Magazine in November 2017

NMLRA.org

Muzzle Blasts on Instagram
NMLRA on Facebook

NMLRA on Youtube

Muzzle Blasts Podcast



The unsung heroes of the Fur Trade | Feast of the Hunter's Moon 2019

We made the trip this past fall to the TCHA "Feast of the Hunter's Moon" living history event at the Fort Ouiatenon site in West Lafayette Indiana.

The Feast of the Hunters’ Moon is a re-creation of the annual fall gathering of the French and Native Americans which took place Fort Ouiatenon, a fur-trading outpost in the mid – 1700s. It is held annually in early autumn on the banks of the Wabash River, four miles southwest of West Lafayette, Indiana.

Thousands of participants re-enact this event creating a feast for your senses. Smell the wood smoke, hear the report of the rifles, savor authentic food and more.

Continuous, free programming is held on five stages. French and Native American music and dance, fife and drum corps performances, military drills and demonstrations, fashion shows, games and contests can be enjoyed at the 50th celebration of this event. Special hands-on activities include the children’s trade blanket, costume try-on, candle-dipping, story telling, bead bracelet making, cross-cut sawing, and tomahawk throwing

We'd like to thank the Tippecanoe County Historical Association for allowing us to film during their event.

Find out more about the TCHA and the work they are doing to preserve history here

Forging a Roasting Fork with B and A Forge | NMLRA Traditional Craft

We catch up with Broadus and Angus Thompson of B&A Forge at the NMLRA National Championships to hang out and watch them work.

It was an absolute delight to observe these boys work through the week. Many will say that kids these days don’t want to learn or work hard, but Broadus and Angus Thompson, as well as their friends are a shining exception to the norm.


This video was brought to you by the members of the NMLRA, thank you.

Follow Broadus on Instagram

Website: https://nmlra.org/

Instagram: Instagram.com/muzzleblasts

Facebook: https://www.facebook.com/NMLRA/

Muzzleblasts Podcast: https://anchor.fm/muzzleblasts

2020 Old Town Trade Faire- Xenia Ohio!

Join the Stitcher’s Cabin for their 2020 Old Town Trade Fair, March 7-8th at the Greene County Fairgrounds in Xenia, Ohio.

The event will feature camp furniture, cookware and forged iron, clothing, books and music, bottles, plates, teas and soaps, leather and fires, silver Jewelery, beads, lanterns, candles, hats, moccasins, early firearms, swords, tomahawks, knives as well as toys and games!

IMG_2273.jpeg

A look at an original 225 year old flintlock

It was wonderful to get our eyes on this original Beck flintlock rifle during our September National Championship. This rifle is estimated to be 225 years old, it was converted to percussion during its life, but was converted back to flintlock with what is believed to be an early Siler Lock.

Owned by "Pole Cat Porter" in the early 1900s, this rifle, and its owner was instrumental to early muzzleloading and living history (At the time termed Buckskinning).

We sit down with exhibit organizers Mark Barnhill and William E. Jones to talk about the Pole Cat Porter exhibit, early 1900s muzzleloading and more in an upcoming video, stay tuned!

Subscribe to the Muzzle Blasts Podcast

Follow the NMLRA on Facebook

Follow Muzzleblasts on Instagram

Follow the Longhunter Society on Instagram

The NMLRA on Pinterest





Giving Tuesday and the NMLRA

In the spirit of holiday giving, please consider a tax-deductible donation to the National Muzzle Loading Rifle Association

GivingTuesday_01.jpg

Starting tomorrow (Tuesday) 8am EST - Facebook will match dollar for dollar to any donation. They will stop this campaign after donating $7 million, which won’t last long.
Plan to help Facebook support the NMLRA

The NMLRA is a 501(c)3 created to promote, support, nurture, and preserve our Nation’s rich historical heritage in the sport of muzzleloading through recreational, educational, historical, and cultural venues such as match competition, hunting, gun making and safety, historical re-enactments, exhibits, museums, libraries, and other related programs.

The NMLRA is devoted to the concept of providing high-quality educational instruction in a great learning environment that inspires both the students and the teachers. The NMLRA Education Center, which opened in 2010, is an ideal facility for historical education and the heritage arts associated with the sport of muzzleloading. 


Giving Tuesday is December 3rd making it the perfect time to support the National Muzzle Loading Rifle Association and help us preserve American History

How to Load a Muzzleloader

We wanted to bring this illustration out from the Muzzle Blasts Magazine archives. Commissioned in 2015, we’d like to thank Larry Small for illustrating this great diagram.

IMG_1983.jpeg

How to load a Muzzleloader

  1. Make sure the bore is dry by using a ramrod with a cleaning jig and a clean, dry patch.

  2. With the hammer down for safety, clean the frozen, pan, and flint (watch out for the sharp edges of the flint). Be sure the flash hole is clear of obstruction by inserting a vent pick, paper clip, or pipe cleaner. Load a flintlock with the frizzen and hammer all the way forward.

    1. For a percussion firearm, inspec the nipple for obstruction by using a nipple pick or paper clip. With an unloaded firearm, snap a cap or two. Always point the muzzle in a safe direction.

  3. Pour the powder from a powder horn or flash into a measure. For safety, never pour powder directly into the bore from a horn or flask.

  4. Pour the measured powder charge down the bore. Avoid placing your hands or face directly over the muzzle.

  5. Center a lubricated or moistened patch over the bore and place the lead ball onto the patch.

  6. With the short end of a short starter, set the patched ball into the bore. Use the Pam of your hand to press the ball into the muzzle.

  7. Push the ball deeper with the long end of the short starter by using the palm of your hand.

  8. Firmly seat the load against the powder charge by using short strokes with your ramrod. NEVER fire a muzzleloader if the ball is not firmly seated on the powder charge.

  9. Use a pencil to make a reference mark on your ramrod when the lead ball is correctly loaded.

  10. Remove the ramrod and store it under the barrel.

  11. For a flintlock, fill the pan 1/4 to 1/3 full of priming powder, place the hammer into the half- cock position, and close the frizzen. When ready to shoot, bring the hammer into full cock position.

    1. For a percussion muzzleloader, bring the hammer into the half-cock position and place a cap firmly onto the nipple. When ready to shoot, place the hammer at full cock.

  12. Be certain of your target and what lies beyond. Aim and fire.

  13. Run a damp cleaning patch down the bore and begin the process again, no need to repeat step #9

Shop Small this year with NMLRA Craftsmen and Vendors

By Dave Ehrig and the Muzzle Blasts’ Staff

Call the place “Commercial Row,” the “Sheep Sheds,” or some other affectionate name, there is no denying the fact that when you arrive at the National Range for the first time, or the 100th, you feel like you have found a home!

With humble beginnings of roofed sheds with no sides, built by the exhibitors “sweat equity” in cooperation with the NMLRA, they came into existence in November 1961; and, just in time for Christmas!

Sequence 03.00_12_26_17.Still006.jpg

If you have ever visited this iconic corner of the Walter Cline Range, you have probably been overwhelmed with all of the merchandise being offered. There are untold numbers of muzzleloading rifles, shotguns, pistols; leather hunting bags for a myriad of accoutrements. Powder horns, some in the green and others gloriously finished with fine scrimshaw/engraving, tease the eyes and jog the mind’s historic memory banks. Brass accoutrements for the most discretionary competitors, hunters and collectors glisten in the light; while bone and antler handled patch knives, larger hunting knives, and all manner of collectible Damascus blades beckon the buyer.

My first purchases took place way back in 1978, my first visit to Friendship, Indiana, from eastern Pennsylvania. As primitive rendezvousers were coming to the forefront of primitive camping with their teepees, wedge tents, formal marquees and wall tents, I found it difficult to find the lodges, clothing, shoes, hats, bags, and everything “Fur Trade” at local muzzleloading shoots. But Friendship, that magical little kingdom along the Loughery Creek, had it all in Commercial Row. And nothing has changed; it just gets better each year!

I remember well my regrets after leaving the shining times in “the Row,” and they were very regrettable, that I didn’t have the contact information for each shop so that I could order what I needed . . . once home.

And now we face every competitor’s and each Longhunter’s scariest month on the calendar: December. Why? Simply told, every shooter is asked by their spouse at the beginning of that month, “What would you like for Christmas!”

Knowing thin ice when you are about to “step into it,” we tread carefully and respond. We mumble with an often heard reply, “oh a shirt, sweater, tie, jacket, pajamas might be nice . . . or some other mundane object that we really don’t want or need. Well, after you read this issue, you will have all the answers to the gifts that you secretly really wanted and knew that no local big box store would carry them. You will be armed with contacts to the world of muzzleloading guns, gadgets, and gear. You will see the faces of the merchants, know how to get into contact with them, and while making your spouse happy because they are actually procuring something that you really want, it will be easy!

So sit back, reread your Muzzle Blasts with a pen and paper in hand, and begin to take notes. It might lead to the Merriest Christmas that your family ever experienced!

Art Seymour

IMG_3095 (Custom).jpeg

Art’s history with the Sheep Sheds began after doing several years of Rendezvous out West. He was trading in chevron beads when he met Sherry of the Timberline Traders. Thanks to her inviting stories of the NMLRA, I finally came to Friendship for the first time in 1991. And guess what? I have been coming here ever since!

I hand craft all of my chevron beads; plus, I make a lot of other bead varieties. Each one is made from blown glass and that includes the historical bottles and art glasses. My specialty items are chevron beads, bottles and western sage. If interested, you can contact me at juniperneveda@gmail.com; 775-629-9079; or visit my website: www.seymourchevron.com

Bill Keeler

IMG_2913 (Custom).jpeg

“Beaver Bill” has been coming to Friendship since 1958, but his first year in to offer his tomahawks and knives was 1985. Muzzleloaders quickly noticed the quality of his craft and starting demanding more, so in 1995 he quit his day job and became a full-time knife and hawk artisan purveyor.

If you are a reenactor, rendezvouser, competition thrower, or just appreciate authenticity, Beaver Bill has the tools you need. His offerings include Pipe Tomahawks; Throwing Tomahawks; Throwing Knives; Belt Knives; Scalping Knives; Spike Axes; Ranger Hawks; Belt Axes; Bag Axes; and Hammer Poll Axes.

You can contact Bill at Beaver Bill Forging Works; phone 513-756-1983; beaverbill@zoomtown.com; or check his website at www.beaverbill.com

Mark and Afeelea Nevling

70478865_1473018706172017_7317306507397532086_n.jpg

Mark and Afeela have been coming to Friendship since 1999, but found their way into the Commercial Row by 2002. Feeling the pull of history because one of his ancestors fought and died at the Battle of Brandywine (Pennsylvania) during the American Revolutionary War, Mark began crafting his specialty, “Burr Oak Knives.”

You can see the difference in my knives, they are made with handmade Damascus steel; a very specialized steel. Mark likes to use fossil mammoth ivory and fossil walrus ivory for the unique handles. Not only are the knives artistically handcrafted, he also makes every sheath unique to the custom knives.

Afeelea Nevling not only contributes to working the business end of Burr Oak Knives, she makes her own specialty line of organic soaps and no artificial colors or ingredients.

Contact them at 989-472-3167; or visit their website: www.burroakknives; or find them on Facebook and Instagram.

Scott Pobjoy

The founder of Cash Manufacturing, Tedd Cash, had been coming to Friendship since the 1960s. His brass accoutrements are well known and in most shooters’ pouches and loading boxes across the country. Scott has worked with Ted for 17 years and when Tedd was ready to retire, Scott purchased the company in October 2005. He added all the Firekit items as well as many other accoutrements. Scott most recently improved Universal Straightline Capper.

The company offers brass Cappers; Gun Hangers; Funnels; Powder Measurers; Ramrod Pipes; Nosecaps; Survivalist Items; Trekker Lanterns; a variety of brass, German Silver and copper Boxes; and many more items for the discerning shooter/hunter. The new and improved Universal Straightline Capper, Swivel and Flip Top powder measurers are much sought items.

Cash Manufacturing Co. Inc. can be contacted at 606-849-5664; office@TDCMFG.com; or visit the website for a full array of the product line at www.TDCMFG.com

Curt Johnson

The “Gunmakers of Illinois, Etc.” has been an NMLRA member since 1968. The booth existed under a former owner, George and Dorothy Shumway, until George passed away. Then it was operated as Curt’s booth until now. Curt Johnson is also the author of Gunmakers of Illinois, 1683-1900, volumes I and II.

Curt carries books on Antique Firearms and Related Items; Antique Firearms & Parts; Trade Silver; Tang Sights for percussion target rifles; Guide Bullet Starters for percussion Rifles are made to order.

Curt makes reproduction “lollipop” tang sights for the countless percussion target rifles that no longer have them. He makes them in various diameters and thread sizes. Custom made guide bullet starters are made to fit those same rifles. Curt Johnson is always interested in buying or photographing guns from early Illinois makers.

Curt can be contacted at 815-915-6971; or email at ilgunmkr@yahoo.com

Lee Fry and Charles Kirkland

Dixie Gun Works is a household name to everyone in the muzzleloading culture. Their catalogues of 620+ pages are required reading for all who want to know anything about the sport. The founder Turner Kirkland has been coming to Friendship since the 1950s, selling items out of his car’s trunk before the Sheep Sheds and Commercial Row came into being. The company has been in Commercial Row for many years. They are open for the Spring and Fall Shoots to take care of customers’ many needs.

As you can see from Margaret Miller holding the new Pedersoli Double Barrel Flint 20 Gauge Shotgun, Dixie is a knowledgeable and fun place to visit at the Friendship Sheep Sheds. They stand ready to share shooting supplies, antique gun parts, black powder guns and accessories.

Contact Dixie Gun Works at 1-800-238-6785; Lee.fry@dixiegunworks.com; or visit their website at www.info@Dixiegunworks.com

E. T. Harrison

Little Creek Long Rifles has been coming to Friendship for 17 years. We supply Long Rifles, Smooth Bores, Flint Locks and Jewelry. Our specialty is to provide fine Rifles and Smooth Bores for competitors and hunters.

Contact E. T. Harrison at 731-926-6418; or email tngunmaker@gmail.com

Charles Burton

FCI Barrels (Flintlock Construction Inc.) was established by Burton in 2007. He creates custom muzzleloading rifle and smoothbore barrels that are made from 12L14 steel and are shot for group before shipping. Caliber sizes range from .29 to .69, depending on the size and type of barrel ordered. Smoothbore Trade Gun barrels with shorter octagons, 2 wedding bands and double taper to thin muzzle up to 48 inches long are available. Pistol barrels are available straight octagon rifled; tapered octagon rifled; swamped; octagon to round smoothbore; tapered round smoothbore; with limited brass barrel inventory (call for availability.)

Contact Burton’s FCI /Barrels at Charles Burton, 250 S. Liddie Way, Morehead, KY 40351; phone 606-780-7709; FLINTLOCKCALB50@HOTMAIL.COM

Flint and Judy Anderson

Flint and Judy Anderson like to state: “We have no business, we just stay busy.” Flint’s dad, Jim Anderson has been coming to Friendship since the 1960s and won in 1973 with a flintlock that Flint was named after. He likes to tell people that he has been there his whole life!

They sell fine gun stock wood in “Spalded Maple, Walnut and Ash.” They also are purveyors of great knives and other interesting items. “Shooters Night” is a big night for us on Monday night in Commercial Row. Come see Judy and Flint and they promise that you will enjoy their booth. We make it fun. You can contact us at 317-509-9731, or email flintanderson@gamail.com

Jack Lewis/Marie Taylor

The Fort Lewis/J.Lewis MFG. Arms began at Friendship in 1948 when they traded and sold out of the back of their car or on trade blankets. The Deer’s Sheep Shed was built in 1964 and they have had the same booths 39&40 since that time. They have raised a family here at the NMLRA in Friendship, Indiana. My daughters helped to raise money to build the first playground. Daughter Marie Taylor and Jack now make the shows together. They are at the same campsite (A4) since 1964. Jack and wife Faye along with their family have had many wonderful times on site, or as he states, “its home away from home for us.”

They deal in Antique Guns; Antique Parts; Bowie Knives and Pocket Knives. They also have some unique display items that include Springfield Locks from 1795-1864; Bayonets; and a .45-70 Trapdoor. Their specialty item is a percussion pistol in most calibers that Jack created in 1966. He only made them 100 of them. J. Lewis Mfg. Arms percussion pistols were shot at the Walter Cline Range firing line and won championships for five years in a row.

You can contact him or Marie Taylor at 740-858-6400; or email marietaylor903@gmail.com

Gary Nebel

“Gary’s Gunsmith Shop” has been onsite in the NMLRA Commercial Row for 51 years. Gary proudly states that he never missed one! His large inventory includes Leather, Buckskin Clothing, and Shooting Bags; all of which are manufactured in his shop. His specialty items include Leather Bags; Buckskin Clothing; Buckskin Pants, Buckskin Shirts, and Buckskin Leather Dresses.

You can contact Gary Nebel at 765-763-6896; email gnebel1@frontier.com; or visit the website www.garygunsmithshop.com

Harvey Brumfield

Harvey’s first trip to Friendship was in 1960 when he was 20 years old. He liked all of what Friendship stood for and offered, so he has been coming back ever since. Four years ago he rented a booth on Commercial Row to sell his guns that were collected over 75 years, as well as to sell friends collection that lost a battle with cancer.

Harvey Brumfield sells Custom Flintlock Rifles, Custom Made Knives, accessories and related items. His specialty is Custom Flintlocks. You can contact him at 859-548-2612; or email at field66@windstream.net

Jim Chambers Flintlocks, Ltd.

Jim and Barb Chambers are familiar faces to flintlock builders everywhere. More than just a pleasant family demeanor, they are skillful purveyors of Original Siler Locks with 22 historically accurate Lock Styles. The locks are also hand tuned with a limited lifetime guarantee. They also offer historically accurate rifle, fowler and pistol kits.

They have had a long history with the NMLRA and Friendship’s Commercial Row. Barb literally grew up with the business. She points out that everything is American made and that they proudly employ U.S. Veterans in their Canler, North Carolina business.

Contact the Chambers at 828-667-8361; email CHAMBERS@FLINTLOCKS.COM; or visit the website www.FLINTLOCKS.COM

Poppen Mocs

IMG_2765 (Custom).jpeg

The Poppens have witnessed two generations of selling at Friendship’s Commercial Row. With more than 30 years of face-to-face sales and sharing information, they have built a following of NMLRA members. They accept orders for custom-made, hand-sewn moccasins. But they also offer an offering of historical knives from the 1640 to 1840 era of the American frontier. Moreover, they offer historical blades, quillwork, bows and arrows.

Judith likes to highlight their handmade knives as her husband Paul has been making them for 51 years.

Contact the Judith and Paul at 218-349-8545; or write Poppens Mocs at P.O. Box 682, Satsuma, FL 32189.

Kevin/Marsha Killelea

Kevin and Marsha began primitive rendezvous camping in 1978. For years they did trading from a blanket but now are in a Friendship booth at Commercial Row. Kevin had back surgery in 1987 and began scrimshawing powder horns. But now, his horns are much in demand. His horns are historically accurate, depicting the time period from 1700 forward to the 1890s. He and Marsha also deal in antiquities. His specialty includes scrimshawed powder horns and accoutrements.

The Killeleas can be contacted at 815-434-7635; or email keomark2000@hotmail.com

L&R Lock Company

Another familiar face to the muzzleloading gun builders of Friendship is L&R Lock Company from Sumter, SC. Currently they are featuring their Jacob Dickert of Lancaster County, Pennsylvania. Dickert made his own locks from 1755-1822, but he also built complete flintlock rifles as well. Dickert also supplied locks to other gun makers. The Allentown-Bethlehem, Lancaster and Bucks County Schools and the makers within these schools such as A. Verner, J. Moll, Herman and John Rupp, John Knoll, Melchoir Fordney, Abraham Schweitzer and J.P. Beck utilize this style lock.

But L&R also offer 47 other models as well as triggers.

They can be contacted at 2328 Cains Mill Road, Sumter, SC 29154; phone 803-481-5790; or visit their site at www.lr-rpl.com

Larry Landrum

Larry has been a competitive pistol shooter for more than 40 years, as well as a primitive camper at Friendship. His corner of the sheep sheds is filled with a delight potpourri of unique tools and exciting findings. He offers jewelry; pre-Civil War books; Primitive accessories; fur/leather; wooden boxes; blankets; black powder rifles; BP Cartridges; ML Rifles; ML Shotguns; and Tri Pods.

Cover Enterprises also has a very unique specialty item: Pre-Civil War Medical Books. To contact Larry, phone 317-460-5192.

Rick & Liza Kindig

Log Cabin Shop has been involved with the NMLRA almost from the beginning. Wes Kindig was instrumental in the beginning of Commercial Row. Dan Kindig is a past president of the NMLRA. Both Wes and Dan are in the NMLRA Hall of Fame. Friendship National Matches and the NMLRA continue to be a huge part of the Log Cabin’s plans, now and into the future. They look forward to the comradery and fellowship with the muzzle loading community every year. They say, “See you in June!”

Log Cabin stocks a full line of shooting supplies; Patches; Round Balls; Caps; Powder; Bullet Molds; Ramrods; Oils and Cleaning Supplies; Components for the Gun Builder; Locks; Stocks; Barrels; Triggers; Chisels and Gouges; Stains and Finishes; Books on Historical Arts (Gun Building; Horn Making; Fabric Arts;) Early American History Books and many more. Rifles from Lyman and Traditions are offered, as are used custom made rifles. Antique rifles are a specialty.

Specialty items include: 62-inch long padded gun cases with full zipper and sturdy handles; machined mainspring vises for removing the frizzen and mainsprings (which are made in the USA from gun barrel quality steel; “Trade Silver” Gift certificates for the hard to buy for shooter.

Contacts: phone 330-948-1082; email logcabin@logcabinshop.com; or visit the website www.logcabinshop.com

Michael Eder

As soon as one enters the gates to Friendship’s Walter Cline Range, eyes wander to the left at the complex of shops known as Commercial Row and also as the Sheep Sheds. On the corner of that complex is a large shop called Flintlocks LLC. Brightly lit with employees having just as big smiles is the Eder family. A 2nd Generation business, it was started in the early 1960s at Friendship. The business moved to the front of Commercial Row in the early 1980s and serves as an anchor for the business community at the NMLRA Range.

Flintlocks LLC offers a ‘must see” of “stuff.” Offerings include: shooting supplies; balls; patches; caps; flints; cleaning supplies; Moose Milk; cleaning patches; Ballistol; ML rifles, shotguns, pistols; parts to build the same; cutlery supplies; knife blanks and knife handles.

To contact Mike and Flintlocks LLC, phone 317-683-5102; email sales@myflintlock.com; or visit the website www.myflintlocks.com

Jason Gatliff

Sequence 03.00_13_24_24.Still007.jpg

Historical Enterprises, LLC is a publisher of Muzzleloader Magazine, books and DVDs and Jason is its Editor. Jason first attended Friendship in 2001 and is now a Life Member with the NMLRA. Many of the faces at Friendship have graced the pages of his magazines, books and DVDs. Special items from his booth in the Sheep Sheds include New DVDs like “Building the Daniel Boone Rifle” and “Relief Carving” featuring longrifle builder Mike Miller.

To contact Jason, phone 615-230-9853; or email Custserv@muzzleloadermagazine.com; or website www.muzzleloadermagazine.com

Randy Grunkenmeyer

Currently a Life Member with attendance dating back to 1980, Randy is a full-time gunsmith and registered shooter. Randy Grunkenmeyer has been a vendor participant for years at his booth “RG Gunsmithing.”

Since most of the items for sale are handcrafted and custom built, inventory is limited to orders, but I do have completed shop items that include powder/shot dispensers; and “Georgian Pistol” books by Norman Dixon.

Randy works closely with his customers to ensure that all of their needs are met. His focus is on “fine quality and well-performing firearms” that future generations will cherish and appreciate.

RG Gunsmithing can be contacted at 812-934-6412; email grunkrsj@frontier.com; or website www.rggunsmithing.com

Rice Barrel Company

Rice Barrel Co., Inc. produces Match grade quality muzzleloading barrels. They are traditionally “cut rifled” on a proprietary state of the art CNC rifler. They produce straight barrels to 44 inches lengths; swamped barrels to 48 inches in lengths; rifled or smooth (any twist) square or round grooved rifle barrels.

Contact phone 336-492-2614.

Lester Salisbury

Lester has been a Life Member of the NMLRA for about 25 years and a vendor in Commercial Row for 16 years. He has served on the Board of Directors. His parents brought him to Friendship as a child and now he brings his children and grandchildren there.

Items from the S&S Muzzleloading Shop LLC include Custom Built Guns; Knight Rifles; Henry Rifles; Used muzzleloaders; Scopes and Mounts; Bipods; Bullets and Sabots; Roundballs; CCI Primers/Caps; Powder Measurers; Cleaning Patches; Clenzoil; Black Solve; Bore Butter; Blacksights; Barrel Blaster; Solvent Spray; Rigs; Cannon Fuse; Speed Loaders; Nipple Wrenches; Breech Plugs for inlines; Nipples; Breech Plug Grease; Ram Rods; Wedges; Jags; Hodgdon Powder (both loose granulations and pellets;) Wonder Wads; Bore Lights; Ball Starters; Dixie Catalogues; Cappers; and more.

Contact Lester Salisbury’s S&S Muzzleloading Shop at 419-852-2661 or 419-942-1808; or email salbr@bright.net

Angela Jacobi

Angela started coming to Friendship in 1974 as a kid. Dad (Larry Stinsman) had a booth in Commercial Row and I terrorized the masses who passed by! (After all, everyone has a job to do ) I met my best friends down here. There’s no family like your Friendship family. I raised my kids here and now my grandchildren are coming to the NMLRA. Best place in the world.

Angela Jacobi repairs jewelry and eye glasses. She also creates jewelry and rendezvous medallions. The “Silver Butterfly” booth also sells rings; bracelets; necklaces; pendants; earrings; and belt buckles. She also creates silver side plates; thumbguards and sideplates with .999 Sterling inlay pieces for high-end custom built guns.

Angela’s special items include NMLRA Rings; the 1 of 1000 pins; and custom jewelry. If you can think it, I can draw it and create it in precious metal. It will become a cherished piece to hand down for generations.

The “Silver Butterfly” can be contacted at 317-966-5071; or email Customsilversmithing@gmail.com

Everett Smith

Everett “Smitty” Smith has been a member of the NMLRA since the 1970s. He is also a former NMLRA Field Rep for Oklahoma. “Smitty’s Engraving” has displayed his craft for more than 20 years at the Western Nationals on Trader’s Row; and for the last 10 years, Smitty has plied his craft at Friendship’s Commercial Row. His classified ad in Muzzle Blasts has run for 30 years; a testament to his full-time, skillful engraving artistry. Smitty engraves cappers; tobacco boxes; tinder boxes, percussion cap boxes; turned pens and more.

His specialty is custom engraving on muzzle loading guns, as well as modern. You can contact Everett Smith at 405-226-0251; email ersmitty99@yahoo.com; or visit his website at www.smittys-engraving.us

Tim Tressel

Gene Davis was an early member of the NMLRA. He began the lock and trigger business. Gene had other mounts and gun building supplies. Jerry Gutchless continued to build on other locks, triggers and mounts. Today, R.E. Davis Company builds quality locks, triggers, mounts and building supplies for your Authentic American Tradition.

Tim Tressel can be contacted at 419-833-1200; email redavis@redaviscompany.com; or website www.redaviscompany.com

Bob & Sherry Moore

Sequence 03.00_15_42_29.Still009.jpg

Timberline Traders has been a clothing merchant at Friendship since the mid-1970s. We specialize in Ladies and Men’s clothing from x-small to XXX-large. Are specialty items include Men’s Rifleman’s Frock and Shirts; Ladies Bed Jackets, Chemises and Skirts.

To contact Bob and Sherry’s Timberline Traders, phone 941-276-0215; or email whalebone33950@yahoo.com

Tip Curtis

Tip Curtis has been a Life Member of the NMLRA since 1962; on the Board of Directors for four years, and is the Manufacturers Match Coordinator.

The Tip Curtis Frontier Shop at the Friendship side of Commercial Row is a busy spot for new and experienced muzzle loading gun builders. There is a large supply of stocks and barrels on the walls, as well as all the parts necessary for building. For inexperienced builders there are Straight Barrel Rifle Kits; Smoothbore or Fowler Kits; Swamped Barrel Rifle Kits; Rifled and Smoothbore Pistol Kits. Tip offers Custom Muzzleloading Rifles for sale in Finished Custom Flintlock or Percussion ignition.

The Frontier Shop can be contacted at 615-654-4445; or email tipcurtis@bellsouth.net

Whitey

Whitey has been coming to Friendship since 1986 and joined the NMLRA in 1999. He has been a vender in Commercial Row since 2002, active in shooting competition, and is a 1 of 1000 Member.

Whitey has an antique Joe Baron Rifle and all the shooting supplies cased for sale, as well as a 1965 History of Gun, Challenge to any who would beat his score of 100 shots and would the winner $500. The mint-condition rifle is in a display case. He also has a collection of black powder rifles, shotguns and other collectables.

Some specialty items include the Joe Baron side slapper rifle; an entire history in 1965 Muzzle Blasts; a rare Hall Rifle Prototype/Bayonet in case; and a Rigby Rifle in mint condition.

Whitey can be contacted at 812-926-4569; email whudie@comcast.net

Muzzleloading Instructor Course with Klint Macro - June 2020

We have scheduled another Muzzleloading Instructor Course with Klint Macro of the Trigger Pressers Union June 10, 11, and 12, 2020!

In these classes, Klint Macro focuses on working with each and every student to fully understand the NMLRA/NRA Muzzleloading Instructor Course curriculum. You’ll walk away with some great knowledge and the confidence to safely share your love of muzzleloading.

You can register for the class at the NRA website or by contacting Klint directly.

1.jpg

Jeff Luke's Leather Bag Class - Videos on Youtube!

Couldn’t make it to the class? Don’t sweat it, we’re bringing more NMLRA Classes and educational programs to you. In this new weekly series, follow along as Jeff Luke of PoBoy Gear guides these students through the world of “Homespun” hunting pouch creation.

We are beginning a new series of courses at the NMLRA Education Center over the coming year. Our first new class was held with Jeff Luke of "Po Boy Gear". In this first video in this new series, Jeff begins the class with some introductions to historic leather bags, their design and more.

In this first video in this new series, Jeff begins the class with some introductions to historic leather bags, their design and more.

Jeff has decades of leather-working experience from wallets to motorcycle seats, but now has a passion for historically accurate bags and pouches from American History.

Photos from the Middle Tennessee History Coalition's "Tennessee History Trail"

We’re happy to be sharing these great photos from the Middle Tennessee History Coalition’s "2019 Tennessee HIstory Trail” event.

In its fifth year, Tennessee History Trail is a unique heritage timeline event created in conjunction with Tennessee State Parks. This event is held each October at Bledsoe Creek State Park. It spans Tennessee history from 1500 to 1800 and offers programming not otherwise offered in middle Tennessee. It also helps visitors grasp the concept of the past shaping the present, and create a personal connection to the past. In addition to the annual event in October, smaller programs are offered the third Saturday of each month between January and May. Hope to see you on the History Trail.
— Middle Tennessee History Coalition Website

Checking out the event website, the Tennessee History Trail offers a variety of interpretive stations for guests and living historians to enjoy. Among the interpretations you’ll find Pre contact Woodland Native Americans, fur traders, Tennessee longhunters, and settlers of the Cumberland Region.

Learn more about this event and the Non Profit behind it at www.midtnhistory.com

These event photos were shared by Marc McMullen to the NMLRA Muzzleloading and Living HIstory group. We are sharing with Marc’s permission. Thank you Mark for sharing these photos and this event with us!